MyDepots H.264 NETWORK Instrukcja Użytkownika Pobierz pdf (Strona 7)

Visionari Limited Liability Company Visionari Copyright(1.4)2010Version

http://www.mydepots.com

Manual for Remote Control-Router Without UPNP

>>>4-3-2：Input “cmd” on the interface, then click 【OK】

Figure 4-3-2

>>>4-3-3：Then now you should use” ping” to search a new, effective IP for DVR, remember,

keep the previous bit same as your local IP address section(you’ll have got this clue from step

4-2-3), just try to ping the last bit, i. e, writer’s local IP address section is 192.168.1.***, then

writer can ping another IP address, still starts as “192.168.1.***”, the last bit writer can try any

number from 1~254, as you could see from below, writer tried to ping as “192.168.1.201”, if you

find response as so, it means this IP you ping is not used by others, so you could give it as DVR’s

IP address, and fill in 【IP ADDRESS】on figure 4-3

Figure 4-3-3

>>>4-3-4：Well, if it shows reply as below, which means this IP is already applied by others, you

need to change last bit from 1~254 to to re-ping until find a unused one.

Figure 4-3-4

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Brak uwag

MyDepots H.264 NETWORK Instrukcja Użytkownika Strona 7